Sony MP595 Manuale Utente Scaricare il pdf (Pagina 32)

AirLink MP595 / MP595W Modem User Guide

26 2130795

Step 3 — Install the power harness

Inatypicalinstallation,theMPmodemisconnectedtothe

vehicle’sbatterywiththepowerharness.TheMPmodem

supportsavoltagerangebetween9

voltsdirectcurrent(VDC)

and36

VDC,andisdesignedforboth12VDCand24VDC

vehicleelectricalsystems.

Note: Electrical installations are potentially dangerous and should be

performed by personnel thoroughly trained in safe electrical wiring

procedures for vehicles.

Power connector

Note: Connector part numbers:

39-01-2040 or 39-01-2045. Pins

part number: 39-00-0039.

ThepowerharnessconnectstotheMPmodemwithaMolex

connector.

Power connector (Molex) pinouts

ThepinoutsfortheMolexconnectoronthepowerharnessare:

Figure 3-6: Pinouts for the power harness.

Thebattery(red)andignitionsense(white)wiresinthepower

harnessinclude5

Afuses.Theblackgroundwireisnotfused.

(

See“Groundthepowerharness”onpage28.)Replacement

powerharnessesareavailablefromSierraWireless.

Note: The battery cable used for a car, truck, or other mobile

connection must be less than 3 meters in length.

Vehicle installation

ThissectionappliestoinstallingtheMPmodeminavehicle.If

youareinstallingitinanoffice,see

“Officeinstallati on”on

page29.

White wire

(Ignition sense)

Red wire

(Battery)

Unused

Black wire

(Ground)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Nessun commento

Sony MP595 Manuale Utente Pagina 32