
VAIO MicroTower User Guide
Adding Memory
Depending on which VAIO MicroTower model you purchased, your
DIMM (dual in-line memory module) configuration is as follows:
MicroTower
Model
Factory Installed
DIMM
Total
Memory
Upgrade Sockets
Available
PCV-E201 One 32 MB DIMM
32 MB
1
PCV-E203
One 32 MB DIMM/
One 16 MB DIMM
48 MB
0*
PCV-E205
Two 32 MB DIMMs 64 MB
0*
* Models PCV-E203and PCV-E205only: In order to Increase your computer's memory, you must first
remove one of the factory-installed DIMMs and replace it with (MW of greater capacity. Fordetails, see
the VAIO MicroTower Reference Manual, which is available at Sony's website at
http:/Avww. ita.sel.sony.com/support/pc/.
For memory upgrades, use only 3.3V unbuffered 4-clock 64-bit 66 MHz
SDRAM DIMM module Revl.O or 3.3V unbuffered 4-clock 72-bit 66 MHz
SDRAM DIMM module Revl.O. For more information on MicroTower
compatible memory, call Sony at 1-888-4SONYPC (1-888-476-6972).
To install memory
! №ke sure you observe the proper safety precautims when you add OIMMs to
ydur Sony computer. See "Notes on Use" on page 93.
1 Shut down your computer and turn off all peripheral devices, such as
your printer, display, and speakers.
2 Unplug your computer and any peripheral devices.
3 Remove the left-side panel, bottom panel, and front panel, as
described on pages 76 to 77. Then detach the diskette drive, as
described on page 78.
1^ You do not need to completely remove the diskette drive in order to access the DIMM
sockets.
4 If necessary remove any cables, add-in cards or other components to
access the DIMM sockets.
5 Models PCV-E203 and PCV-E205 only:
Remove^either (or both) of the factory-installed DIMMs.
Commenti su questo manuale