Sony HT-NT3 Manuale Utente Scaricare il pdf (Pagina 43)

43

GB

HT-NT3

4-559-516-15(1)

D:\NORM'S JOB\SONY HA\SO150038\HT-NT3 (PMRF 06)\4559516151_GB

(CEK)\070ADD.fm

masterpage:

Right

Additional Information

There is no sound from the TV via the

HDMI OUT (ARC) jack when using the

Audio Return Channel function.

 Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to

[On] (page 26). Also, set [Audio

Return Channel] in [HDMI Settings]

of [System Settings] to [Auto]

(page 26).

 Make sure that your TV is

compatible with the Audio Return

Channel function.

 Make sure that an HDMI cable is

connected to a jack on your TV that

is compatible with the Audio Return

Channel function.

The system does not output sound of

TV programs correctly when connected

to a set-top box.

 Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to

[Off] (page 26).

 Check the connections (refer to the

supplied Startup Guide).

Severe hum or noise is heard.

 Check that the devices are

connected securely.

 Move your audio device away from

the TV.

 The plugs and jacks are dirty. Wipe

them with a cloth slightly

moistened with alcohol.

No sound or only a very low-level

sound is heard from the subwoofer.

 Press SW

 + to increase the

subwoofer volume (page 51).

 Make sure that the on/standby

indicator of the subwoofer is lit in

green. If not, see “No sound is heard

from the subwoofer.” in “Wireless

sound” (page 43).

 A subwoofer is for reproducing bass

sound. In the case of input sources

that contain very little bass sound

components (for example, a TV

broadcast), the sound from the

subwoofer may be difficult to hear.

 When you play content compatible

with copyright protection

technology (HDCP), it is not output

from the subwoofer.

Dolby Digital or DTS multi-channel

sound is not reproduced.

 Check that the DVD, etc. you are

playing is recorded in Dolby Digital

or DTS format.

 You can only enjoy High Bitrate

Audio (DTS-HD Master Audio, Dolby

TrueHD), DSD and Multi Channel

Linear PCM with an HDMI

connection.

Distortion occurs in the sound of a

connected device.

 Reduce the input level for the

connected device by setting

[Attenuation settings - Analog]

(page 24).

No sound is heard from the subwoofer.

 The on/standby indicator of the

subwoofer does not light up.

 Check that the AC power cord

(mains lead) of the subwoofer is

connected properly. (Refer to Step

4 in the supplied Startup Guide)

 Press the  (on/standby) on the

subwoofer to turn on the power.

 The on/standby indicator of the

subwoofer flashes slowly in green

or lights up in red.

 Move the subwoofer to a location

near the Bar Speaker so that the

on/standby indicator of the

subwoofer lights up in green.

Wireless sound

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Commenti su questo manuale

Nessun commento